Hello, I´m from Germany and quite new here. I´m working on my Loki-costume for a year now. The helmet was the most challenging part.
But I´m so happy, ´cause I finally managed it to get a decent looking helmet out of my mold XD.
my Workspace ^^:
![Click image for larger version.
Name: BILD0474.jpg
Views: 5
Size: 1.49 MB
ID: 231357]()
a raw cast of my Loki helmet:
![Click image for larger version.
Name: BILD0494.jpg
Views: 4
Size: 1.30 MB
ID: 231358]()
I´m planning to make the color a little bit darker with the second cast.
Close ups:
![Click image for larger version.
Name: BILD0497.jpg
Views: 3
Size: 1.31 MB
ID: 231359]()
the edges from the mold need to be sanded away yet...
![Click image for larger version.
Name: BILD0504.jpg
Views: 3
Size: 1.27 MB
ID: 231360]()
...
![Click image for larger version.
Name: BILD0505.jpg
Views: 3
Size: 1.41 MB
ID: 231361]()
...
![Click image for larger version.
Name: BILD0506.jpg
Views: 3
Size: 1.22 MB
ID: 231362]()
...
![Click image for larger version.
Name: BILD0512.jpg
Views: 3
Size: 1.34 MB
ID: 231363]()
...
![Click image for larger version.
Name: BILD0513.jpg
Views: 3
Size: 1.41 MB
ID: 231364]()
...
![Click image for larger version.
Name: BILD0514.jpg
Views: 3
Size: 1.31 MB
ID: 231365]()
here I started to remove the sharp edges of the fiber glass material on the bottom:
![Click image for larger version.
Name: BILD0515.jpg
Views: 3
Size: 1.16 MB
ID: 231366]()
But I´m so happy, ´cause I finally managed it to get a decent looking helmet out of my mold XD.
my Workspace ^^:
a raw cast of my Loki helmet:
I´m planning to make the color a little bit darker with the second cast.
Close ups:
the edges from the mold need to be sanded away yet...
...
...
...
...
...
here I started to remove the sharp edges of the fiber glass material on the bottom:
