Hey all,
Got the Hellboy/Kroenen bug again.
I dug out my unfinished Jarvis B Kroenen mask that I bought a few years back.
Gonna try to make a bust similar to this photo.
![]()
I will probably not do the leather collars from the outer and inner coats yet, but would like to do from the black shirt down.
I was reading some old threads and I'm thinking my mask is too big.
Does anyone have the correct dimensions of this screen used Kroenen mask?
The kit I have has the aprox dimensions of 12" height, 8.5" width, 5.5" depth.
I wouldn't actually care about the actual dimensions as long as it all looks accurate, but will I find a German Visor cap to fit this?
I plan on using this as the base.
![]()
Then beefing up the back a bit and using some sort of neoprene or black rubber hood over it.
Thanks for your help :)
Joe
Got the Hellboy/Kroenen bug again.
I dug out my unfinished Jarvis B Kroenen mask that I bought a few years back.
Gonna try to make a bust similar to this photo.
I will probably not do the leather collars from the outer and inner coats yet, but would like to do from the black shirt down.
I was reading some old threads and I'm thinking my mask is too big.
Does anyone have the correct dimensions of this screen used Kroenen mask?
The kit I have has the aprox dimensions of 12" height, 8.5" width, 5.5" depth.
I wouldn't actually care about the actual dimensions as long as it all looks accurate, but will I find a German Visor cap to fit this?
I plan on using this as the base.
Then beefing up the back a bit and using some sort of neoprene or black rubber hood over it.
Thanks for your help :)
Joe